How to secure a sleeping bag to a backpack

How to secure a sleeping bag to a backpack

If a backpack is packed properly, it can hold a lot of stuff. It’s somewhat true that travelers remove endless items from their backpacks in front of amazed crowds. How do you determine what goes where? There is no right or wrong way to pack, just a way to do it.

How to Attach a Sleeping Bag to your Backpack

When you’re going camping, a backpack is a way to keep all your belongings in one place and safely stored inside the trunk of your vehicle until you need it, never having to worry about it. If it’s a wilderness adventure, it will be your backpack that will hold all the basic equipment you need, including your tent as well as sleeping bags and food, and plenty of other essential items that you will carry in your backpack for miles. Many people tend to overpack their backpacks, and it only takes a few minutes to figure out the basic items they must carry on their trip.

A sleeping bag is one of the most important of the backpacker’s must-haves, which is why it’s crucial to understand how to attach a sleeping bag to your backpack. If you’re a sleeping bag carrier for a camping group, chances are you’ll need several sleeping bags attached to your backpack.

The most straightforward way to do this is to use the straps of your backpack and the loops on the backpack loops to secure the bag to your sleeping bag. If that were the case, then this guide would be done in a matter of minutes and we wouldn’t have a guide on how to attach sleeping bags to your backpack. However, as important as they are, not every backpack includes these features, which is why this guide is here.

Internal packing

The most common way to carry a sleeping bag is to leave it outside, and you’ve likely seen people wandering around with huge backpacks that have a sleeping bag at the top.

However, when you pack your sleeping bag open, there is one thing that is simply not true, as the main purpose is to be able to have a dry sleeping bag when you need it. When you open your sleeping bag after a hike, find it damp, and then wait to try to make it warm and comfortable, that’s not what you want to do.

If you have an inner rack in your pack, your sleeping bag can be stored in it. Be sure to roll your sleeping bag into a tight sleeve and then try to make it as compact as possible. To make sure it’s free of moisture, put it in a black garbage bag.

When packing it, it is best to put it towards the lower part of the bag. Some bags come with internal straps to further reduce the size, which also provides plenty of room for your other equipment. Some bags eliminate the straps altogether and provide an additional compartment for your sleeping bag. Many people tend to put their other footwear in this bag, but we recommend that you utilize it for design purposes, as the ability to keep your sleeping bag dry is critical.

Use straps and loops

This requires your backpack to have loops or straps to tuck into the bag. Many backpacks have loops attached to the back of the panel (although many don’t use them and many don’t know what they are for). It’s fairly simple to use, the only thing you have to do is pull these straps through the loops and lift them up.

This can be done by using a small number of backpacks, as there are not many with these features. The only options left are to purchase your own straps, or to purchase the backpack as a whole.

We would say that when buying a brand new backpack, you should make sure the backpack is waterproof from the start (this will save you the trouble of buying a waterproof bag to hold it later).

Tie the sleeping bag to the external frame

Many users prefer an external frame over an internal frame because they think it will retain its structure as well as provide greater overall support. This trick is very effective because it takes advantage of the tie-down points near the bottom of the sleeping bag. They are likely to be found on other backpacks, but no one has explained their purpose.

There are straps near these tie-down points. This is for the purpose of securing the sleeping bag. If your sleeping bag hangs off the back of your pack, this can lead to balance problems when walking and eventually back pain and neck pain. No matter how you secure your sleeping bag to your pack, make sure it is properly secured. This will be the first step in learning how to secure your sleeping bag to your backpack.

Use a cover with an internal frame

Most people find bags with internal frames difficult because they are a cylindrical cavity that you stack items on top of one another. It would be a shame if you tucked your toothbrush in the bottom of the bag, as this would cause you to put your hand in the middle and sift through it until you found it. This can take a long time, be frustrating for the user, and completely ruin the arrangement of your belongings.

Most backpacks have strings attached to the lid to hold the bag in place when it is full. Your back will thank you for carrying it when your backpack is cleaned up and stretched tight.

You can use the same rope to attach an extra sleeping bag to the top of your backpack. Place the sleeping bag on top and then use all other items to pull it tight. However, doing so will leave a gap between the lid and your pack. This gap won’t mean anything, but it has the potential to get soaked with moisture. This is why, while this technique is acceptable, you need a cover made of nylon to ensure that the gap is not affected by the outside world.

Tie the bag at the bottom, or the top?

This is a matter of preference and is based on the position of the straps and loops on your backpack. However, most backpackers will tell you that a backpack is best placed at the top, and offer two good reasons why.

After running for a few hours, you must put the pack away. If the pack is strapped to the lower part of the backpack, it is likely to be exposed to dust and dirt on a regular basis. In addition, most sleep back covers consist of nylon, which is not very strong and will wear out quickly if it comes into regular contact with hard ground. This is also likely to cause damage to the sleeping bag.

In addition, if you own an extremely heavy sleeping bag, it is best to put it on top to prevent back pain. But this is a personal decision and you should carry it in a way that makes it comfortable.

How can I tell if the bed frame is external or internal?

It is very simple and most of the time you can tell just by looking or touching it. The main difference is in their appearance. The external frame looks rather like a square and can carry more equipment than the internal frame. Their frames are made of steel, which is now being replaced by lighter materials.

Internal frames, on the other hand, are lighter, have a cover on top, and are generally very thin. When you know how to attach your sleeping bag to your backpack correctly and without problems, whether you do it externally or internally, you won’t have a problem.

The right way to store your sleeping bag

After your camping experience is over, you need to take care of your sleeping bag. Self-contained bags are good for when you are on the move, but when the padding (sleeping bag) isn’t packed tight enough, they can loosen up over time.

Another way to organize your bag is to find the perfect mesh bag (which will allow it to breathe) or avoid using a cover altogether. Instead, simply fold it up loosely and put it away like a quilt. A key thing to remember is to keep it in the same closet as your regular clothes and don’t store it in the attic, basement or garage.


As we told you, if your backpack doesn’t have any straps to secure your sleeping bag, you can make one out of rope. Most modern backpacks now have compression buckles for making items more compact, and then use the straps to hold your sleeping bag in place.

Leave a Reply